ssr2.5 with 3m fine cut rc - DetailCity.org

mopar or nocar · 07-26-2005, 08:21 PM

i have a red dodge ram truck and its got some swirls on it. Can i use some ssr2.5 with the 3m fine cut rubbing compound or not? should i use the 3m first or the ssr2.5 first over the whole truck, i was gonna use some 3m swirl mark remover for dark cars after these abrasives then topping it all off with nxt liquid. let me know if i can use those too or should i get the ssr1 and use that instead

jaybs02 · 07-26-2005, 09:12 PM

Mopar how bad are your swirls?
Are you doing this by hand?

I would first try some of the SSR2.5 and see it that works, before moving up to a compound, you might want to follow up with a milder swirl mark remover to remove any hazing that you might get from the SSR2.5

Then top with the NXT.

HTH
"J"

mopar or nocar · 07-26-2005, 10:15 PM

they arent that bad but considering i have coats of wax/polish on it they are probably worse that what is being shown. i am doing it with my pc 7336sp that i just bought with some wolfgang pads that will be coming from autogeek with my ssr2.5

07-26-2005, 08:21 PM	#1 (permalink)
mopar or nocar Join Date: Jul 2005 Posts: 12	ssr2.5 with 3m fine cut rc i have a red dodge ram truck and its got some swirls on it. Can i use some ssr2.5 with the 3m fine cut rubbing compound or not? should i use the 3m first or the ssr2.5 first over the whole truck, i was gonna use some 3m swirl mark remover for dark cars after these abrasives then topping it all off with nxt liquid. let me know if i can use those too or should i get the ssr1 and use that instead __________________ 98 red ram 1500 rc sb 5.2/318. flowmast 50 series american thunder. detailed with meguiars, adams and poorboys (mostly megs, for now..)

07-26-2005, 09:12 PM	#2 (permalink)
jaybs02 OBEY ME Join Date: Jun 2004 Location: Quahog Rhode Island Posts: 2,980	Re: ssr2.5 with 3m fine cut rc Mopar how bad are your swirls? Are you doing this by hand? I would first try some of the SSR2.5 and see it that works, before moving up to a compound, you might want to follow up with a milder swirl mark remover to remove any hazing that you might get from the SSR2.5 Then top with the NXT. HTH "J" __________________ 02 Bronzemist Oldsmobile Alero Acronym List (update) / Mfg. Pad Colors / Picture Posting & Resizing

07-26-2005, 10:15 PM	#3 (permalink)
mopar or nocar Join Date: Jul 2005 Posts: 12	Re: ssr2.5 with 3m fine cut rc they arent that bad but considering i have coats of wax/polish on it they are probably worse that what is being shown. i am doing it with my pc 7336sp that i just bought with some wolfgang pads that will be coming from autogeek with my ssr2.5 __________________ 98 red ram 1500 rc sb 5.2/318. flowmast 50 series american thunder. detailed with meguiars, adams and poorboys (mostly megs, for now..)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
megs medium cut cleaner	FiveOhMustang	Detailing Product Discussion - Misc.	1	02-17-2005 02:04 AM
3M PI Fine Cut Compound Gumming - Why??	smprince1	Detailing In General	1	12-20-2004 06:59 PM
Megs #2 Fine Cut + # 16	Don	Detailing Product Discussion - Misc.	2	10-03-2004 11:15 PM
Meg's Fine cut??	grisby	Detailing In General	2	07-08-2003 02:23 PM
3M product info needed. Tried search-no success	Tarios	Detailing Product Discussion - Misc.	3	06-16-2003 06:18 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)