Crystal Mist - DetailCity.org

Smokin' Mark · 10-04-2008, 11:37 PM

I think I'm using this product incorrectly. When I use it, it smears badly and is difficult to get off. It looks great once it's off, but I didn't expect it to act this way. Ideas?

holland_patrick · 10-05-2008, 12:17 AM

If you don't tell us just how your using it.. we can't help correct it.

jaybs02 · 10-05-2008, 08:12 AM

Sounds like its the way you are using it.

Work in a small area wipe it on thin and then buff.

"J"

trhland · 10-05-2008, 10:19 AM

do to its carnuaba content it will smear. its normal .. mist a panel. give a wipe and then go over again and buff to a shine.. as far as a drying aid q/d its not the best. it does take more elbow grease.. ive been useing (adams) or ( last touch) more often for washes and crystal ,mist once in a while to recharge the wax.....

Smokin' Mark · 10-05-2008, 10:32 PM

Maybe I'm using too much. I'm used to using MCG Quick Detailer that wipes right off.

Autogeek · 10-06-2008, 10:00 AM

try using less product. A little mist is all it takes wipe with one side of your microfiber then flip the towel and lightly buff dry. It should be clear and slick with no streaks.

10-04-2008, 11:37 PM	#1 (permalink)
Smokin' Mark Join Date: Sep 2008 Location: Montgomery, AL Posts: 102	Crystal Mist I think I'm using this product incorrectly. When I use it, it smears badly and is difficult to get off. It looks great once it's off, but I didn't expect it to act this way. Ideas?

10-05-2008, 12:17 AM	#2 (permalink)
holland_patrick Join Date: Dec 2004 Location: Newington CT Posts: 1,003	Re: Crystal Mist If you don't tell us just how your using it.. we can't help correct it. __________________ Words of Wisdom from Brak "In a restaurant, if you order chicken salad and egg salad, which one will come out first?" :drunk

10-05-2008, 08:12 AM	#3 (permalink)
jaybs02 OBEY ME Join Date: Jun 2004 Location: Quahog Rhode Island Posts: 2,980	Re: Crystal Mist Sounds like its the way you are using it. Work in a small area wipe it on thin and then buff. "J" __________________ 02 Bronzemist Oldsmobile Alero Acronym List (update) / Mfg. Pad Colors / Picture Posting & Resizing

10-05-2008, 10:19 AM	#4 (permalink)
trhland Join Date: Dec 2006 Location: nj Posts: 101	Re: Crystal Mist do to its carnuaba content it will smear. its normal .. mist a panel. give a wipe and then go over again and buff to a shine.. as far as a drying aid q/d its not the best. it does take more elbow grease.. ive been useing (adams) or ( last touch) more often for washes and crystal ,mist once in a while to recharge the wax.....

10-05-2008, 10:32 PM	#5 (permalink)
Smokin' Mark Join Date: Sep 2008 Location: Montgomery, AL Posts: 102	Re: Crystal Mist Maybe I'm using too much. I'm used to using MCG Quick Detailer that wipes right off.

10-06-2008, 10:00 AM	#6 (permalink)
Autogeek Join Date: Nov 2005 Posts: 706	Re: Crystal Mist try using less product. A little mist is all it takes wipe with one side of your microfiber then flip the towel and lightly buff dry. It should be clear and slick with no streaks. __________________ www.autogeek.net Use coupon code PINWAX20 for 20% off everything on www.pinnaclewax.com except buffers and the complete wash system!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode